Chain insertion machine
Product description：
Sunzo Company independently develops and develops various types of drainage board insertion machine equipment, mainly including chain type insertion machine, friction type insertion machine, steel wire rope type insertion machine, track type insertion machine, track type insertion machine, and other equipment. Plastic drainage board insertion machine is suitable for the construction requirements of plastic drainage boards in various soft soil foundations such as hydraulic fill, silt soft layer, hard topsoil layer, shallow layer, and ultra deep soil layer. The basic mechanical performance is excellent and the stability is good, Strong design ability, good mobility, and fast design speed.
Service hotline:
136 0005 0009
Consult now
Product Introduction
Our company develops and designs various types of drainage board insertion machines, mainly including chain type drainage board insertion machines, friction type drainage board insertion machines, steel wire rope type drainage board insertion machines, etc. The steel wire rope drainage board insertion machine is suitable for inserting plastic drainage boards on various soft and medium hard layers of the ground. It has a simple structure, convenient maintenance, stable and reliable performance, flexible and convenient displacement, and so on.
Rack Features
1. The rack has a vertical cross-section, reasonable design, light weight, and a maximum installation depth of 40 meters.
2. Adapt to the installation and use of various excavators and workplaces.
3. It adopts the Kawasaki series hydraulic motors from Japan, which have the advantages of simple structure, high power transmission, and smooth operation.
4. The plug-in board is driven by a chain and can work in low, medium, high speed, heavy load, high temperature conditions, and adverse environments with flying dust.
5. Chain transmission mode can more effectively reduce chain breakage under heavy loads and chain jumping during chain operation.
6. Splines are connected to large bearing Shaft-driven bicycle drive, which can effectively reduce the cantilever radial force on the hydraulic spline shaft and prevent the spline shaft from bending and breaking.
Technical requirements for rack
1. The excavator is modified and equipped with an additional 2 tons of counterweight. The truss part is made of imported high-strength steel plates, which have good plasticity and welding performance, high strength and toughness. After plasma cutting and high-strength multi section forming, it can reduce weight by 40% under the same conditions, improve the operating range, and save energy and environmental protection.
2. The total weight of the entire truss mechanism is controlled at 6.3 tons, including hydraulic motors and chains.
Construction site drawings
Home
